A kitchen knife seems easy to describe. A blade and handle are the obvious terms that describe the kitchen knife's anatomy. but look into the details and study the knife's anatomy in depth.
The Tip:
The tip of the knife is at the opposite end of the handle and is pointed, sharp and fairly thin. It is typically pointed but there are some knives with ends that are cut off straight, rounded or at a slant. The tip is used for cutting small items, cutting food into thin strips, and carving. It is also used for making incisions, such as would be used when making a slit in the side of pork chops or chicken breasts where stuffing would be added.
The Cutting Edge:
The cutting edge is the bottom edge of the blade that runs from the heel to the tip of the blade. It is very sharp and can be straight cut or serrated. The cutting edge is used to slice, cut or chop food items both large and small, with the middle of the blade being used most often.
The blade edges are available with different grinds, which have different purposes.
The Spine:
The spine is the edge opposite the cutting edge on the blade. It is thicker than the cutting edge and adds strength to the blade. It has a smooth, blunt edge to allow the user to grip it with thumb and forefinger or to be able to apply pressure with fingers or the palm of a hand to add control to the task being performed.
The handle is the part of the knife that holds the blade. The tang of the blade extends down in the handle to attach the blade to the handle. The tang is riveted into the handle or is sometimes enclosed in a plastic or metal handle. It is important to get a good feel of the handle before purchasing a knife to be sure it fits your hand properly. If it is too big or small, it can result in inefficient use and can cause tired and aching hands.
The cutting edge is the bottom edge of the blade that runs from the heel to the tip of the blade. It is very sharp and can be straight cut or serrated. The cutting edge is used to slice, cut or chop food items both large and small, with the middle of the blade being used most often.
The blade edges are available with different grinds, which have different purposes.
The Spine:
The spine is the edge opposite the cutting edge on the blade. It is thicker than the cutting edge and adds strength to the blade. It has a smooth, blunt edge to allow the user to grip it with thumb and forefinger or to be able to apply pressure with fingers or the palm of a hand to add control to the task being performed.The Heel:
The heel is approximately the last two inches of the blade's cutting edge at the opposite end from the tip. It is used for cutting thick or coarse items that require extra pressure or strength. It assists in making faster more efficient cuts when the task calls for it.
The Bolster:
A bolster is a thick piece of metal (collar or shank) that is at the end of the blade, just before the handle. It generally runs the full length from the spine of the blade down to the cutting edge. The bolster, along with the tang, gives the knife balance, which provides for better control of the knife when cutting. It also provides a place for fingers to be placed for comfort and also provides protection from the blade. The bolster is an indication that the blade was formed using the forged process rather than being stamped.
The Handle:
The handle is the part of the knife that holds the blade. The tang of the blade extends down in the handle to attach the blade to the handle. The tang is riveted into the handle or is sometimes enclosed in a plastic or metal handle. It is important to get a good feel of the handle before purchasing a knife to be sure it fits your hand properly. If it is too big or small, it can result in inefficient use and can cause tired and aching hands.The Tang:
The tang is the part of the knife blade that extends into the handle. The better quality knives have a full tang that runs the entire length of the handle. It is sandwiched in between the outside layers of the handle and generally contains several holes where it is riveted to the handle for durability. The tang takes the same shape as the handle and can generally be seen on both edges. A full tang is best for adding strength and balance to the knife but there are also some good quality knives whose tang only runs part way into the handle. Molded handles contain a pointed rat tail tang, which is a long narrow shaft that is completely contained in the handle with which it forms a bond. This type of tang adds balance and strength to the knife but also provides for a little lighter weight knife.
The Butt:
The butt end of the knife is at the opposite end of the tip. If the knife has a full tang it is where the tang ends. Sometimes the butt of the knife is used to tenderize or grind ingredients so it is important that the butt is of stable construction.
The Metal Rivets:
Metal rivets are used to secure the tang to the handle of the knife. To prevent irritation to the hand, the rivets should be completely smooth and lie flush with the surface of the handle. In addition, this will help prevent debris and microorganisms from collecting in the spaces between the handle and the rivets.
I hope the information above will help you choose a better quality knife that meet your needs.
Source:
http://www.recipetips.com/kitchen-tips/t--1075/types-of-kitchen-knives.asp
Source:
http://www.recipetips.com/kitchen-tips/t--1075/types-of-kitchen-knives.asp
